银川
银川ISO9000| 银川ISO14000| 银川OHSAS18000| 银川一体化认证| 银川HACCP/ISO22000| 银川ISO/IEC17025| 银川国军标认证| 银川3C认证| 银川GMP认证| 银川有机产品认证| 宁夏企业管理培训| 宁夏安全生产标准化| 宁夏能源管理体系| 质量认证论坛
网站首页 > 银川 > 银川国军标认证 >

银川国军标认证 GJB9001B与旧版的变化 银川中鸿认证咨询公司

发布时间:2015-02-12 19:28 点击次数:

银川国军标认证 GJB9001B与旧版的变化 银川中鸿认证咨询公司
Yinchuan certification GJB9001B and the old version of the change in Yinchuan hung certification consulting company
GJB9001质量管理体系标准是由中国人民解放军总装备部在90年代未牵头组织总参通讯部、海军、空军、二炮等装备部,新时代中心、理工大学、航天七0八所、三0一所、二0三所、核工业标准化所等部门,在等同采用GB/T19001-2008的基础上,根据军工产品的特殊要求修订成的。为了便于识别,对增加的特殊要求的楷体字表示。
The GJB9001 quality management system standards by Chinese PLA General Armament Department in 90 years is not the lead organization of the General Staff Department of communications, Navy, air force, the second artillery and other equipment department, new era center, University of science and technology, the space of seven 0 eight, 0 three, two San0yi Institute, nuclear industry standardization institute and other departments, in with the GB/T19001-2008 based on the revised, according to the special requirements of military products. In order to facilitate the identification, to increase the special requirements of the italicized words said.
本标准对承担军用产品、研制、生产、试验和维修任务的组织是必须执行的质量管理标准,并可做为对体系进行评定的依据。
This standard must be implemented to undertake military products, development, production, test and repair task organization is the quality management standard, and can be used as the basis for system evaluation.
GJB9001B-2009于2010年4月1日实施。参照国家标准换版的做法,GJB9001A-2001证书向GJB9001B-2009转换的时间为两年(2010.4月1日至2012年3月31日),相对于GB/T19001-2008《质量管理体系要求》的变化而言,GJB9001B-2009标准的变化还是比较大的,主要差异内容如下:
GJB9001B-2009 implementation in April 1, 2010. According to the national standard for the version of the practice, converting the GJB9001A-2001 certificate to the GJB9001B-2009 time for two years (2010.4 Feb 1 to March 31, 2012), with respect to changes in GB/T19001-2008 "quality management system requirements" in terms of the GJB9001B-2009 standard, the change is quite large, the main differences are as follows:
① GJB9001B-2009标准 3术语和定义中明确,“本标准军用产品特殊要求采用GJB1405中的术语和定义。”目前见到的最新版本是 GJB1405A-2006《装备质量管理术语》。
Clearly the GJB9001B-2009 standard 3 terms and definitions, "the special requirements of military products using standard terminology and definitions in GJB1405." The latest version is GJB1405A-2006 "to see the term" equipment quality management.
② GJB9001B-2009中有两处增加了对程序文件的要求,分别是在6.5质量信息,“组织应编制形成文件的程序,确定质量信息的需求,按规定收集、贮存、传递、处理和利用。产品质量信息管理应满足顾客的需要。”和7.3.8新产品试制,“组织应编制形成文件的新产品试制过程控制程序,以保证:……。”
The GJB9001B-2009 has two increase of the requirements of the program files, respectively in 6.5 quality information, "the organization shall establish documented procedures, determine the quality of information needs, in accordance with the provisions of collection, storage, transmission, processing and utilization. The management of product quality information should meet the needs of customers." And the 7.3.8 trial production of new products, "the organization shall establish a documented new product production process control procedures, to ensure:......."
③ GJB9001B-2009中明确要求形成文件的有7.1产品实现的策划,“组织应编制质量计划(质量保证大纲)。顾客要求时,质量计划及调整应征得顾客同意。”和7.7技术状态管理,“组织应实施技术状态管理,……。顾客要求时,技术状态管理计划、技术状态基线确定及其更改应经顾客同意。”关于采购产品的验证7.4.3“组织应编制采购产品的验证准则。顾客参加验证活动不能免除组织提供可接受产品责任。组织应保持采购产品的验证记录(见4.2.4)。当组织委托供方进行验证时,应规定委托的要求并保持委托和验证的记录(见4.2.4)。”对于如何编制质量计划(质量保证大纲),可参阅GB/T19015-2008《质量管理体系质量计划指南》和GJB1406A-2005《产品质量保证大纲要求》。关于如何作好技术状态管理,可参阅GB/T19017-2008《质量管理体系 技术状态管理指南》、GJB3206A-2010《技术状态管理》及GJB5709-2006《装备技术状态管理监督要求》等,重点作好设计和开发的更改控制。
The GJB9001B-2009 explicitly requests documented 7.1 planning of product realization, "the organization shall establish the quality plan (quality assurance program). When required by the customer, the quality plan and adjustment should be with consent of the customer." And the 7.7 technical state management, "the organization shall implement technical state management,....... When required by the customer, technical state management plan, technology status at baseline determination and changes should be approved by the customer." Regarding procurement verification of the product 7.4.3 "the organization shall establish procurement verification of the product standards. The customer to the validation activities not exempt organizations to provide acceptable product liability. The organization shall maintain records of verification of purchased product (see 4.2.4). When the organization commissioned by the supplier verification, provisions should be commissioned and commissioned by the validation requirements and maintain records (see 4.2.4)." How to prepare quality plan (quality assurance program), can refer to the GB/T19015-2008 "quality management system quality planning guide" and GJB1406A-2005 "product quality assurance program requirements". How to make technical state management, can refer to the GB/T19017-2008 "quality management system of technology status management guide" GJB3206A-2010 "," GJB5709-2006 "technology status management and equipment technology state management supervision requirement", the control key for design and development changes.
④ 对于外包过程是这样说的:“组织应对外包过程进行评审,批准后予以实施,并监督外包过程的执行。顾客要求时,外包过程须经顾客同意(外协是外包的一种形式)。”
It is said in the outsourcing process: "the organization shall review the outsourcing process, to be implemented after approval, and supervision of the execution of the outsourcing process. When required by the customer, outsourced processes shall be approved by the customer (HS is a form of outsourcing)."
⑤ 在军工五项技术方面增加了环境适应性,即“适用时,组织应建立、实施和保持产品的可靠性、维修性、保障性、测试性、安全性和环境适应性档等工作过程。参见GJB450、GJB368、GJB3872、GJB2547、GJB900、GJB4239、GJB1909等。”
The increased environmental adaptability in military technology five aspects, namely "when applicable, the organization shall establish, implement and maintain the product reliability, maintainability, security, testing, safety and environmental adaptability of file work process. See also GJB450, GJB368, GJB3872, GJB2547, GJB900, GJB4239, GJB1909 etc.."
⑥ 对于风险管理宜作“故障模式影响和危害性分析(FMECA),制定风险管理计划,在产品实现各阶段进行风险分析和评估,形成各阶段风险分析文件,必要时提供给顾客。”。
And the risk management should be "failure mode effects and Criticality Analysis (FMECA), to draw up the risk management plan, risk analysis and assessment in the various stages of the product realization, the analysis of each stage of the risk of the formation of documents, when necessary, provide customers.".
⑦ 涉及软件管理的“适用时,组织可参照GJB 5000的要求,建立、实施并改进其软件过程。”目前见到的最新版本是GJB5000A-2008《军用软件研制能力成熟度模型》。
The application relates to the software management "when, organizations can consult the GJB 5000 requirements, establish, implement and improve its software process." The latest version see is GJB5000A-2008 "military software development capability maturity model".
银川国军标认证 GJB9001B与旧版的变化 银川中鸿认证咨询公司
Yinchuan certification GJB9001B and the old version of the change in Yinchuan hung certification consulting company

(责任编辑:奔跑的稀饭)

【中鸿认证咨询-面向全国提供各项认证认可、企业管理培训及企业管理咨询服务。 客服中心电话:18908179001 联系QQ:568143011 1048325836】

相关文章
发表评论
请自觉遵守互联网相关的政策法规,严禁发布色情、暴力、反动的言论。
评价:
最新评论 进入详细评论页>>
推荐机构
关于我们| 加盟合作| 诚聘英才| 网站声明| 意见投诉| 网站地图| 联系我们
更多
Copyright © 2011-2020 中鸿认证咨询网 www.cnqr.org蜀ICP备1500852
面向全国提供服务 联系电话:18908179001 联系QQ:568143011 1048325836